J&M Gaskets & Seals Logo

Cosworth Rocker Cover Gasket

In 2mm nitrile rubber

Weight 188g (approx)
Price £5.85
(£7.02 inc VAT)
Stock In stock
FITTING ADVICE - These type of gaskets can be more difficult to fit than the rigid paper or high performance type. Here is a tip for fitting - Cut 75mm lengths of threaded rod, of suitable thread, insert these into the cam cover securing bolt holes, slip the gasket over these, fit the 1/2 moons, slip the cam cover over the threaded rod lengths and make sure it is properly seated, then remove the rods 1 at a time and replace with the cam cover bolts, once all have been fitted, tighten the bolts down. (This is a guide only)
© J&M Gaskets & Seals Ltd 2013   |   Registered in England, no. 8438694   |   VAT no. GB 184 5979 48